Texaco Anti-Freeze

Please choose the product you require:

Questions? Email us: salesinfo@texacoaruba.com

Havoline Dex-cool Extended Life Anti-Freeze/Coolant

Back to top

Code 7994 Havoline DEX-COOL Extended Life Anti-Freeze/Coolant / Code 7995 Havoline DEX-COOL Extended Life Anti-Freeze/Coolant Pre-Mixed 50150

Havoline Extended Life Anti-FreezelCoolant DEX-COOLOD is a single-phase, ethylene glycol type universal automotive engine coolant based on Texaco's patented long life organic corrosion inhibitor system. Havoline Extended Life Predifuted 50150 AntiFreezelCoolant DEX-COOL is a 50150 mixture of Havoline Extended Life AntiFreezelCoolant and deionized water.

Product Application

Havoline Extended Life Anti-Freeze/Coolant DEX-COOL is a universal engine coolant which incorporates a patented carboxylate inhibitor technology This coolant meets both ASTM D 3306 for automotive service and ASTM D 4985 for heavy duty diesel service.  It is a nitrite-, nitrate-, phosphate-, silicate-, borate and amine-free formulation which uses Texaco's patented carboxylate technology to provide maximum protection of the six basic metal alloys found in most heat transfer systems.  Since the coolant contains no phosphates or silicates, hard water deposits in the cooling system are almost eliminated.  The low level of abrasive dissolved solids in Havoline Extended Life AntiFreeze/Coolant DEX-COOL results in improved water pump seal life.

The life of a coolant in an automobile engine is limited by the corrosion protection ability of the corrosion inhibitors.  The main corrosion inhibitors in Havoline Extended Life Anti-Freeze/Coolant DEX-COOL has been shown to remain above 95% of their original concentration after 150,000 miles in automobiles.  This allows much longer intervals between coolant changes without worrying about loss of corrosion protection. Used Havoline Extended Life Anti-Freeze/Coolant DEX-COOL was tested in laboratory controlled corrosion tests for new coolants after it had already been in service for more than 200,000 miles. The used Havoline Extended Life Anti-Freeze/Coolant DEX-COOL passed the ASTM Dl 384 requirements for glassware corrosion with results equivalent to new coolants and also passed the ASTM D 4340 Aluminum Hot Surface Test for new coolant.  Havoline Extended Life Anti-Freeze/Coolant DEX-COOL represents the next generation of universal engine coolants.  This coolant is suitable for a five year or 150,000 mile service life in automotive applications.

Note: These products are not to be used to protect the inside of potable water systems against freezing.

Product Description and Features

Havoline Extended Life Anti-Freeze/Coolant DEX-COOL is manufactured from ethylene glycol and a highly effective long term corrosion inhibitor package based on carboxylate technology.  This inhibitor system eliminates the need for silicates phosphates, borates, nitrites, nitrates and amine additives traditionally used for this purpose.  The replacement of these inhibitors is significant to water pump life because many of these conventional inhibitors have been shown to be abrasive to water pump seats.  In comparison field tests with conventional coolants in taxi fleets, Havoline Extended Life Anti-FreezelCoolant DEX-COOL significantly reduced the need to replace Water pumps during the 100,000 mile test.

In addition to fleet tests, this product has also been tested by a major manufacturer of water pump seals, and has been found to be more compatible with the seals than any other coolant tested.

Benefits

In service Havoline Extended Life Anti-Freeze/Coolant DEX-COOL provides:

  • Meets GM6277M - General Motor's new Extended Life Coolant specification
  • 5 year or 150,000 miles service interval
  • Provides effective, long term corrosion protection for aluminum, brass, cast iron, steel, solder and copper
  • Protects against winter freeze up and minimizes the chance of summer boil over
  • Compatible with water pump seal materials and minimizes the formation of abrasive dissolved solids
  • Storage stable for at least eight years
  • No silicate dropout or gel formation during use or storage
  • 100% biodegradable in its pure unused form
  • Excellent heat transfer Properties
  • Nitrite, borate, phosphate, nitrate, and amine-free Outstanding hot surface aluminum protection Superior protection in high operating temperatures
  • Compatible with conventional antifreeze.  Dilution with conventional antifreeze will reduce extended life benefits.  Texaco recommends that this product not be diluted by more than 1 0% with conventional coolants.

Telcscan Coolant Analysis Kits

Back to top

Code 2822 TELCSCAN PIF (1 0 kits per case)  / Code 2823 TELCSCAN EXTRA (10 kits per case)

The TELCSCAN extended life coolant/antifreeze testing program was developed to provide customers information on what action to take if their cooling systems (containing Texaco Extended Life Coolant/Anti-Freeze products) has become contaminated with traditional coolants or SCA's (supplemental coolant additives).  The TELCSCAN program should be used for the evaluation of Texaco Extended Life coolant products.  TELCSCAN samples are submitted to an independent lab that will provide coolant condition evaluations and give recommendations for either the continued use of the Texaco Extended Life Coolant/Anti-Freeze present in the cooling system or if a drain and refill of the cooling system should be performed.  Below are brief descriptions of the three tests available for evaluation of Texaco Extended Life Coolant/Anti-Freeze products.

TELCSCAN PIF (Code #2822) test kit will provide Pass/Fail results on inhibitor level concentration.  A passing result indicates that the Texaco Extended Life Inhibitors are still present at levels that will provide cooling system protection.  A failing result indicates that the cooling system has been over diluted with water or conventional coolants and does not have the appropriate level of carboxylate inhibitors to provide protection.  A failing result will require completely draining, flushing and refilling of the cooling system with Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze.  One case contains 10 kits.

TELCSCAN EXTRA (Code # 2823) test results will report the level of carboxylate inhibitors (pass/fail), pH, nitrite and freeze point.  The test will give a failing result if the levels of carboxylatel pH or nitrite are not within acceptable ranges.  The failure to meet acceptable carboxylate levels can be indicative of over dilution of the coolant with either water or other coolants and should be corrected immediately in order to regain appropriate inhibitor levels and protection of cooling system components.  The failure to meet desired nitrite levels could be indicative of continuing additions of nitrites due to continued SCA use.  High nitrite levels have been linked to solder bloom and should be avoided.  The pH level of coolant, if it changes drastically from its original level, can indicate problems with blow-by.  Blow-by and pH changes are indicative of head gasket problems that should be corrected in order to maintain proper engine operation.  Freeze point will be reported only as information to determine if ambient conditions require an adjustment. TELCSCAN EXTRA is the test kit that should be used it a customer wishes to extend Texaco Extended Life Coolants service life beyond 600,000 miles or 12,000 hours. One case contains 1 0 kits.

Texaco Anti-Freeze/Coolant

Back to top

Code 2353 Texaco Anti-Freeze/Coolant / Code 7975 Texaco Anti-Freeze/Coolant Pre-Mixed 50150

Texaco Anti-Freeze/Coolant is a superior quality, single phase, ethylene glycol based product It is a low silicate, all-purpose coolant designed for use in both heavy duty diesel and automotive engines, particularly those containing aluminum alloys. Texaco Anti-Freeze/Coolant Prediluted 50150 is a 50150 mixture of Texaco AntiFreeze/Coolant with deionized water

Product Application

Texaco Anti-Freeze/Coolant is specially formulated to meet the stringent aluminum corrosion protection requirements of automotive engines.  Because of its low concentration of silicate, it also complies with Cummins and other heavy-duty diesel engine manufacturer's silicate requirements.  This product is also suitable for use in industrial internal combustion engines where an antifreeze/coolant is required to provide protection against freezing, boil over, and corrosion.  Texaco Anti-Freeze/Coolant does not meet Dex-Cool requirements.

Note: These products are not to be used to protect the inside of potable water systems against freezing.

Product Description and Features

Texaco Anti-Freeze/Coolant is a single phase, ethylene glycol based product blended with a premium quality additive package.  It is a universal low silicate coolant designed for use in both heavy duty diesel and automotive engines, particularly those containing aluminum alloys.  This product provides anti-foam properties, and rust and corrosion protection for aluminum, brass, copper, solder, steel and cast iron.  It mixes readily with any clean tap water and is compatible with cooling system filters and supplemental additives.

Texaco Anti-Freeze/Coolant is free of nitrites and amines.

Benef its

In service Texaco Anti-Freeze/Coolant provides:

  • Universal formula for both automotive and heavy duty diesel engines (ASTM D 3306 and ASTM D 4985)
  • Aluminum corrosion protection
  • Heat transfer properties
  • Anti-foam characteristics
  • Corrosion protection for aluminum, brass, copper, solder, steel and cast iron
  • Low silicate formulation
  • Nitrite-free, amine-free and borax-free
  • Mixes readily with clean tap water
  • Compatible with cooling system filters
  • Compatible with heavy duty diesel supplemental coolant additives
  • Compatible with most major brands of coolant
  • 100% biodegradable in its pure unused form

Texaco Extended Life Coolant System

Back to top

Code 7997 Texaco Extended Life Coolant/Anti-Freeze / Code 7998 Texaco Extended Life Prediluted 50/50 Coolant/ Anti-Freeze / Code 7999 Texaco Extender

Texaco Extended Life Coolant/Anti-Freeze is a single-phase, ethylene glycol type heavy duly diesel engine coolant based on Texaco's patented extended life carboxylate corrosion inhibitor system with nitrite and molybdate. Texaco Extended Life Prediluted 50150 Coolant/Anti-Freeze is a 50150 mixture of Texaco Extended Life Coolant/Anti-Freeze with deionized water. Texaco Extender is the prescribed recharge for Texaco Extended Life Coolant/Anti-Freeze. It is recommended that only Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze be used for initial fill and top-off.  Use Texaco Extended Life Coolant/Anti-Freeze should you need to adjust the freeze point as required by ambient conditions.

Product Application

Texaco Extended Life Coolant System is a heavy duty engine coolant system which incorporates a patented carboxylate inhibitor technology This system of coolant products includes Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze, a 50/50 mixture of coolant and deionized water, Texaco Extended Life CoolantfAnti-Freeze, a concentrate and Texaco Extender, a prescribed recharge package.  Texaco Extended Life Prediluted 50150 Coolant/Anti-Freeze meets ASTM D 4656 and D 5345.  When properly employed, in solution, Texaco Extended Life Coolant/Anti-Freeze meets both ASTM D 3306 for automotive service and ASTM D 4985 for heavy duty diesel service.  This is a, nitrate-, borate-, phosphate-, silicate-, and amine-free formulation which uses Texaco's patented carboxylate technology to provide maximum protection of the six basic metal allays found in most heat transfer systems.  Since the coolant contains no phosphates or silicates, hard water deposits in the cooling system are reduced.  Water pump seal wear is reduced as a result of fewer abrasive dissolved solids in Texaco Extended Life Coolant System which results in improved water pump seal life.

The patented carboxylate technology in Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze has been shown to remain above 80% of their original concentration after 300,000 miles of on-road use (three years or 6,000 hours of off-highway use) in heavy duty diesels without the addition of supplemental coolant additives.

Note: These products are not to be used to protect the inside of potable water systems against freezing.

Product Description and Features

Texaco Extended Life Coolant/Anti-Freeze is manufactured from ethylene glycol and a highly effective, extended life corrosion inhibitor package.  This inhibitor system eliminates the need for silicates, phosphates, borate's, nitrates, and amine additives traditionally used for this purpose.

Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze is a 50/50 mixture of Texaco Extended Life Coolant/Anti-Freeze with deionized water for freeze protection down to minus 34'F (-36.7'C) and boil over protection to 265'F (129'C) with a 15 lb.  Pressure cap.  These products need no precharging or recharging for 300,000 miles of on-road use (three years or 6,000 hours of off-highway use).  After 300,000 miles, simply add Texaco Extender, and Texaco Extended Life Prediluted 50/50 CoolanVAnti-Freeze is good for another 300,000 miles of on-road use (three years or 6,000 hours of off-highway use).  Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze is compatible with other traditional silicate antifreezes, but the extended life benefits may be reduced if mixed.

Texaco Extender is the prescribed recharge for Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze.  It has been specifically formulated to double the life of Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze.  It should only be added at 300,000 miles of on-road use (three years or 6,000 hours of off-highway use,) in heavy duty commercial engines to restore protection against scale buildup, corrosion, cavitation erosion, and pitting of wet sleeve liners.  Use of this product at the specified interval is necessary to ensure maximum coolant life of 600,000 miles of on-road use (six years or 12,000 hours of off-highway use).  After 600,000 miles of on-road use (six years or 12,000 hours of off-highway use), simply drain your system and fill with a fresh charge of Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze.  The 600,000 mile service interval could be further extended but laboratory analysis of the coolant would be required. It is recommended that coolant be changed at least every six years and disposed of properly.

Do not add traditional coolants or SCAs to Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze, since doing so will reduce the products' extended life benefits.  Texaco Extender is not recommended for use with the initial fill of Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze.

Benefits

  • 300,000 miles on-road use (three years or 6,000 hours off-highway use) on initial fill
  • Additional 300,Ooo miles on-road use (three years or 6,000 hours off-highway use) by adding Texaco Extender
  • Easy maintenance
  • No inhibitor level testing required
  • Excellent pitting protection for wet sleeve cylinder liners
  • Effective, long term corrosion protection for aluminum. brass, cast iron, steel, solder, and copper
  • Improved water pump seal life due to reduced water pump seal wear resulting from fewer dissolved solids
  • No silicate dropout or gel formation during use or storage
  • Excellent heat transfer
  • Reduced hard water scale
  • Superior protection in high operating temperatures
  • Protects against winter freeze up and minimizes the chance of summer boil over
  • Outstanding hot surface aluminum protection
  • Suitable for gasoline powered automotive and industrial engines
  • 100% biodegradable in its pure unused form
  • Compatible with conventional antifreeze.  Dilution with conventional antifreeze will reduce extended life benefits.  Texaco recommends that this product not be diluted by more.than 1 0% with conventional coolants
  • Can be used to top up systems with conventional coolant but SCAs must continue to be added.

Texaco Extended Life Coolant System (Nitrite Free)

Back to top

Code 16445 Texaco Extended Life Coolant/Anti-Freeze Nitrite Free / Code 16447 Texaco Extended Life Prediluted 50/50 Coolant/AntiFreeze Nitrite Free

Texaco Extended Life Coolant/Anti-Freeze Nitrite Free is a single-phase, ethylene glycol type heavy duty diesel engine coolant based on Texaco's patented extended life carboxylate corrosion inhibitor system without nitrite. Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze Nitrite Free is a 50/50 mixture of Texaco Extended Life Coolant/Anti-Freeze Nitrite Free with deionized water.  It is recommended that only Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze Nitrite Free be used for initial fill and top-off.  Use Texaco Extended Life Coolant/Anti-Freeze Nitrite Free should you need to adjust the freeze point as required by ambient conditions.

Product Application

Texaco Extended Life Coolant System is a heavy duty engine coolant system which incorporates patented carboxylate corrosion inhibitor technology This system of coolant products includes Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze Nitrite Free, a 50/50 mixture of coolant and deionized water, and Texaco Extended Life Coolant/Anti-Freeze Nitrite Free, a concentrate.  Texaco Extended Life Prediluted 50150 Coolant/Anti-Freeze Nitrite Free meets ASTM D 4656 and D 5345.  When properly employed, in solution, Texaco Extended Life Coolant/Anti-Freeze Nitrite Free meets both ASTM D 3306 for automotive service and ASTM D 4985 for heavy duty diesel service.  These nitrate-, nitrite-, borate-, phosphate-, silicate-, and amine-free formulations use Texaco's patented carboxylate technology to provide maximum protection of the six basic metal alloys found in most heat transfer systems.  Since the coolant contains no phosphates or silicates, hard water deposits in the cooling system are reduced.  Water pump seal wear is reduced as a result of fewer abrasive dissolved solids in Texaco Extended Life Coolant System which results in improved water pump life.

The patented carboxylate technology in Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze Nitrite Free has been shown to remain above 80% of their original concentration after 400,000 miles of on-road use in heavy duty diesels without the addition of supplemental coolant additives.

Note: These products are not to be used to protect the inside of potable water systems against freezing.

Product Description and Features

Texaco Extended Life Coolant/Anti-Freeze Nitrite Free is manufactured from ethylene glycol and a highly effective, long-term corrosion inhibitor package.  This inhibitor system eliminates the need for silicates, phosphates, borate's, nitrates, nitrites, and amine additives traditionally used for this purpose.

Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze Nitrite Free is a 50/50 mixture of Texaco Extended Life Coolant/Anti-Freeze Nitrite Free with deionized water for freeze protection down to minus 34'F (-36.7C) and boil over protection to 265'F (1 29'C) with a 15 lb. pressure cap.  These products need no precharging or recharging for 400,000 miles of on-road use (four years or 8,000 hours of off-highway use).

Do not add traditional coolants or SCAs to Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze Nitrite Free, since doing so will reduce the products' extended life benefits.

Benefits

  • 400,000 miles on-road use (four years or 8,000 hours off-highway use) on initial fill
  • Easy maintenance
  • No inhibitor testing is required
  • Offers excellent pitting protection for wet sleeve cylinder liners
  • Effective, long term corrosion protection for aluminum, brass, cast iron, steel, solder, and copper
  • Improved water pump life due to reduced water pump seal wear resulting from fewer dissolved solids
  • No silicate dropout or gel formation during use or storage
  • Excellent heat transfer
  • Reduces hard water scale
  • Superior protection in high operating temperatures
  • Outstanding hot surface aluminum protection
  • Also suitable for gasoline powered automotive (5 years/150,000 miles) and industrial engines
  • 100% biodegradable in its pure unused form
  • Compatible with conventional antifreeze.  Dilution with conventional antifreeze will reduce extended life benefits.  Texaco recommends that this product not be diluted by more than 1 0% with conventional coolants.
  • Protects against winter freeze up and minimizes the chance of summer boil over

Texaco Extended Life Coolant System (Propylene Glycol)

Back to top

TEXACO EXTENDED LIFE COOLANT SYSTEM (PROPYLENE GLYCOL)

Code 16449 Texaco Extended Life Coolant/Anti-Freeze PG / Code 16450 Texaco Extended Life Prediluted 50150 Coolant/Anti-Freeze PG / Code 7999 Texaco Extender

Texaco Extended Life Coolant/Anti-Freeze PG is a single phase propylene glycol type heavy duty diesel engine coolant based on Texaco's patented extended life carboxylate corrosion inhibitor system with nitrite and molybdate. Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze PG is a 50150 mixture of Texaco Extended Life Coolant/Anti-Freeze PG with deionized water. Texaco Extender is the prescribed recharge for Texaco Extended Life Coolant/Anti-Freeze PG. It is recommended that only Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze PG be used for initial fill and top-off.  Use Texaco Extended Life Coolant/Anti-Freeze PG, should you need to adjust the freeze ~t as required by ambient conditions.

Product Application

Texaco Extended Life Coolant System in PG is a heavy duty engine coolant system which incorporates a patented carboxylate corrosion inhibitor technology This system of coolant products includes Texaco Extended Life Prediluted 50/50 Coolant/AntiFreeze PG, a 50150 mixture of coolant and deionized water, Texaco Extended Life Coolant/Anti-Freeze PG, a concentrate and Texaco Extender, a prescribed recharge package.  When properly employed, in solution, Texaco Extended Life Coolant/Anti-Freeze PG meets ASTM D5216 for both automotive service and light duty diesel service.  This is a nitrate-, borate-, phosphate-, silicate-, and amine-free formulation which uses Texaco's patented carboxylate technology to provide maximum protection of the six basic metal allays found in most heat transfer systems.  Since the coolant contains no phosphates or silicates, hard water deposits in the cooling system are reduced.  Water pump seal wear is reduced as a result of fewer abrasive dissolved solids in Texaco Extended Life Coolant System which results in improved water pump seal life.

The patented carboxylate technology in Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze PG has been shown to remain above 95% of their original concentration after 300,000 miles of on-road use (three years or 6,000 hours of off-highway use) in heavy duty diesels without the addition of supplemental coolant additives.  After 300,000 miles of on-road use (three years or 6,000 hours of off-highway use), simply add the Texaco Extender, and Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze PG is good for another 300,000 miles of on-road use (three years or 6,000 hours of offhighway use).  This system allows for 600,000 miles of on-road use (six years or 12,000 hours of off-highway use) between coolant changes without worrying about loss of corrosion protection.

Note: These Products are not to be used to Protect the inside of potable water systems against freezing.                                                                

Product Description and Features

Texaco Extended Life Coolant/Anti-Freeze PG is manufactured from Propylene glycol and a highly effective, long-term corrosion inhibitor package.  This inhibitor system eliminates the need for silicates, phosphates, borate's, nitrates, and amine additives traditionally used for this purpose.

Texaco Extended Life Prediluted 50/50 CoolanVAnti-Freeze PG is a 50/50 mixture of Texaco Extended Life Coolant/Anti-Freeze PG with deionized water for freeze protection down to -27'F (-32.7'C) and boil over protection to 260-F (126.7'C) with a 15 lb. pressure cap.  These products need no precharging or recharging for 300,000 miles of on-road use (three years or 6,000 hours of off-highway use).  After 300,000 miles, simply add Texaco Extender, and Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze PG is good for another 300,000 miles of on-road use (three years or 6,000 hours of off-highway use). Texaco Extended Life Prediguted 50/50 Coolant/Anti-Freeze PG is compatible with other traditional silicate antifreezes, but the extended life benefits will be reduced if mixed.

Texaco Extender is the Prescribed recharge for Texaco Extended Life Prediluted 5WW Coolant/Anti-Freeze PG.  It has been SPecifically formulated to double the life of Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze PG.  It should onlv be added at 300,000 miles of on-road use (three years or 6,000 hours of off-highway use; in- heavy duty commercial engines to restore protection against scale buildup, corrosion, cavitation erosion, and pitting of wet sleeve liners.  Use of this product at the specified interval is necessary to ensure maximum Coolant life of 600,000 miles of on-road use (six years or 12,000 hours of off-highway use).  After 600,000 miles of on-road use (six years or 12,000 hours of off-highway use), simply drain your system and fill with a fresh charge of Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze PG.  The 600,000 mile service interval could be further extended but laboratory analysis of the coolant would be required.  It is recommended that Coolant be changed at least every six years and disposed of properly.

Do not add traditional coolants or SCAs to Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze PG, since doing so will reduce the products' extended fife benefits.  Texaco Extender is not recommended for use with the initial fill of Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze PG and Should only be added after 300,000 miles on road use (three years or 6,000 hours of off-highway use).

Benefits

  • 300,000 miles on-road use (three years or 6,000 hours off-highway use) on initial fill
  • Additional 300,000 miles on-road use (three years or 6,000 hours off-highway use) by adding Texaco Extender
  • Easy maintenance
  • No inhibitor testing required
  • Excellent pitting protection for wet sleeve cylinder liners
  • Effective, long term corrosion protection for aluminum, brass, cast iron, steel, solder, and copper
  • Improved water pump life due to reduced water pump seal wear resulting from fewer dissolved solids
  • No silicate dropout or gel formation during use or storage
  • Excellent heat transfer
  • Reduced hard water scale
  • Superior protection in high operating temperatures
  • Protection against winter freeze up and summer boil over
  • Outstanding hot surface aluminum protection &Also suitable for gasoline powered automotive and industrial engines 9 100% biodegradable in its pure unused form
  • Compatible with conventional antifreeze.  Dilution with conventional antifreeze may reduce the extended life benefits.  Texaco recommends that this product not be diluted by more than 10% with conventional coolants.
  • Can be used to top off systems with conventional coolants by SCAs must continue to be added.

Texaco Extended Life Coolant System (PG- Nitrite Free)

Back to top

Code 7991 Texaco Extended Life Coolant/Anti-Freeze PG Nitrite Free / Code 7992 Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze PG Nitrate Free

(The name for this product has changed since the publication of the Texaco Product Digest (4195).  The previous name was Code #7991 Texaco Anti-Freeze/Coolant ETX-6280BPK and Code #7992 Texaco Anti-Freeze/Coolant ETX-6280BPK Pre-Mixed 50/50)

Texaco Extended Life Coolant/Anti-Freeze PG Nitrite Free is a single-phase, propylene glycol type heavy duty diesel engine coolant based on Texaco's patented extended life carboxylate corrosion inhibitor system without nitrite. Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze PG Nitrite Free is a 50/50 mixture of Texaco Extended Life Coolant/Anti-Freeze PG Nitrite Free with deionized water.  It is recommended that only Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze PG Nitrite Free be used for initial fill and top-off.  Use of Texaco Extended Life Coolant/Anti-Freeze PG Nitrite Free (concentrate), should you need to adjust the freeze point as required by ambient conditions.

Product Application

Texaco Extended Life Coolant System is a heavy duty engine coolant system which incorporates a patented carboxylate corrosion inhibitor technology.  This system of coolant products includes Texaco Extended Life Prediluted 50/50 Coolant/AntiFreeze PG Nitrite Free, a 50/50 mixture of coolant and deionized water, Texaco Extended Life Coolant/Anti-Freeze PG Nitrite Free, a concentrate.  When properly employed, in solution, Texaco Extended Life Coolant/Anti-Freeze PG Nitrite Free meets both ASTM D 5216 for automotive and light duty diesel service.  This is a, nitrate-, nitrite-, borate-, phosphate-, silicate, and amine-free formulation which uses Texaco's patented carboxylate technology to provide maximum protection of the six basic metal alloys found in most heat transfer systems.  Since the coolant contains no phosphates or silicates, hard water deposits in the cooling system are reduced.  Water pump seal water is reduced as a result of fewer abrasive dissolved solids in Texaco Extended Life Coolant System which results in improved water pump life.

Note: These products are not to be used to protect the inside of potable water systems against freezing.

Product Description and Features

Texaco Extended Life Coolant/Anti-Freeze PG Nitrite Free is manufactured from propylene glycol and a highly effective, long-term corrosion inhibitor package.  This inhibitor system eliminates the need for silicates, phosphates, borates, nitrates, nitrites, and amine additives traditionally used for this purpose.

Texaco Extended Life Prediluted 50/50 Coolant]Anti-Freeze PG Nitrite Free is a 50/50 mixture of Texaco Extended Life Coolant/Anti-Freeze PG Nitrite Free with deionized water for freeze protection down to -27'F (-32.7'C) and boil over protection to 260'F (126.7'C) with a 15 lb. pressure cap.  These products have a service life of 400,000 miles of on road use (four years or 8,000 hours of off-highway use).

Do not add traditional coolants or SCAs to Texaco Extended Life Prediluted 50/50

Coolant/Anti-Freeze PG Nitrite Free, since doing so will reduce the products' extended life benefits.

Benefits

  • 400,000 miles on-road use (four years or 8,000 hour's off-highway use) on initial fill
  • Easy maintenance
  • No inhibitor testing required
  • Excellent pitting protection for wet sleeve cylinder liners
  • Effective, long term corrosion protection for aluminum, brass, cast iron, steel, solder, and copper
  • Improved water pump life due to reduced water pump seal wear resulting from fewer abrasive dissolved solids
  • No silicate dropout or gel formation during use or storage
  • Excellent heat transfer
  • Reduced hard water scale
  • Superior protection in high operating temperatures
  • Protection against winter freeze up and summer boil over
  • Outstanding hot surface aluminum protection
  • Also suitable for gasoline powered automotive (5 years/1 50,000 miles) and industrial engines
  • 100% biodegradable in its pure unused form
  • Compatible with conventional anti-freeze.  Dilution with conventional anti-freeze will reduce extended life benefits.Texaco recommends that this product not be diluted by more than 1 0% with conventional coolant.s

Texcool E

Back to top

Code 7939 Texcool El 00 / Code 7946 Texcool E 105

Texcool E 100 is a superior quality single phase, ethylene glycol based product It is a silicate free coolant designed for use in stationary engines. Texcool E 105 is a 50 volume % mixture of 7939 Texcool E 100 and 50 volume % deionized water.

Product Application

Texcool E 100,is an inhibited ethylene glycol used as a heavy duty industrial coolant and heat transfer agent.  The inhibitor system is designed to protect brass, copper, solder, steel, cast iron, aluminum, and other metals commonly found in industrial cooling and heating systems.  A foam inhibitor is included to minimize foaming tendencies during service.

Texcool E 100 coolant is recommended as a coolant in stationary engines, in applications such as natural gas processing, irrigation, power generating systems, oil field operations, and portable air compressors.  Texcool E 100 should not be used in automotive or non-stationary heavy duty diesel applications!  Texcool E 100 coolant protects the cooling system from freezing in winter, overheating in summer, and corrosion in all seasons.  Extensive simulated service and actual service tests have proven the effectiveness of Texcool E 100 coolant in heat transfer applications over the use of brine or uninhibited glycol-water solutions.  The results were lower maintenance costs and improved heat transfer with Texcool E 100.

Texcool E 100 coolant is recommended as a heat transfer fluid for line heaters.  A line heater circulates a heated fluid around a pipe to raise the temperature of the pipe's content in order to control reactions or ease pumping operations.

Texcool E 100 coolant is recommended as a heat transfer fluid for snow melting systems, loading ramps, walkways, highways, airfield runways, and as a coolant in ice skating rinks and air conditioning systems.  Texcool E 100 coolant is approved by the USDA for defrosting of cooling coils in federally inspected meat packing plants, provided the exhaust air from the cooling coils is not in excess of +10'F Texcool E 100 must be used in a manner which prevents direct or indirect contamination of edible products.

Note: These products are not to be used to protect the inside of potable water systems against freezing.

Texcool EXL Product Family

Back to top

Code 16766 TEXCOOL EXL 300 / Code 16769 TEXCOOL EXL 305 / Code 16768 TEXCOOL EXL 304 / Code 16767 TEXCOOL EXL 303

TEXCOOL EXL coolants are superior quality, single phase, ethylene glycol based products using Texaco's patented extended life carboxylate corrosion inhibitor system with nitrite.  These silicate free coolants have a service life of 12,000 hours with the addition of Texaco Extender at 6,000 hours.  Four products comprise the TEXCOOL EXL family:

  • TEXCOOL EXL 300 - a coolant concentrate
  • TEXCOOL EXL 305 - a 50/50 mixture of TEXCOOL EXL 300 and deionized water
  • TEXCOOL EXL 304 - a 60/40 volume percent mixture of deionized water/glycol.  Corrosion inhibitor concentration is maintained at the level of TEXCOOL EXL 3051
  • TEXCOOL EXL 303 - a 70/30 volume percent mixture of deionized water/glycol.  Corrosion inhibitor concentration is maintained at the level of TEXCOOL EXL 305

Product Application

The TEXCOOL EXL family of coolants are ethylene glycol based coolants containing patented carboxylate inhibitors and nitrite.  These products have application as heavy-duty industrial coolants and heat transfer fluids.  The unique inhibitor system in the TEXCOOL EXL products are designed to protect brass, copper, solder, steel, cast iron, aluminum and other metals commonly found in industrial cooling systems.

The TEXCOOL EXL products are suitable for use in stationary engines used in natural gas processing, irrigation, power generation, oil field operations and portable air compressors.  TEXCOOL EXL products provide protection against overheating and freezing and give total cavitation/corrosion protection of cooling/heat transfer systems.  Extensive simulated service and actual field service tests have proven the eftectiveness of the TEXCOOL EXL products.

Other applications for TEXCOOL EXL products can be found as a heat transfer fluid in snow melting systems, loading ramps, walkways, highways, airfield runways and as a coolant in ice skating rinks and air conditioning systems.

NOTE: These products are not to be used to protect the inside of potable water systems against freezing.

Product Description and Features

The TEXCOOL EXL family of products are all silicate, nitrate, borate, phosphate am amine free.  The patented carboxylate corrosion inhibitors give these products a service life of 12,000 hours.  No testing is required to determine inhibitor levels. b.. the product requires the addition of Texaco Extender at 6,000 hours.  To further extend the recommended service life of any TEXCOOL EXL product beyond the 12,000 hours stated service life a sample of the coolant should be sent to Texaco for analysis.

Product Benefits

In service the TEXCOOL EXL products provide:

  • A service life of 12,000 hours with the addition of Texaco Extender at 6,000 hours.
  • No required testing of inhibitors.
  • A series of silicate, phosphate, borate, nitrate and amine free products
  • Excellent heat transfer and corrosion protection for all cooling system metals including aluminium
  • A non silicate-gel forming formula
  • A series of prediluted products to exact concentration levels using high quality deionized water
  • A 100% biodegradable coolant in its unused form

Texcool P 100 Series

Back to top

Code 7970 Texcool P 150

Texcool P 150 is a superior quality single phase, propylene glycol based product.  It is a silicate free coolant designed for use in stationary engines.

Product Application

Texcool P 150 is an inhibited propylene glycol used as a heavy duty industrial coolant and heat transfer agent.  The inhibitor system is designed to protect brass, copper, solder, steel, cast iron, aluminum, and other metals commonly found in industrial cooling and heating systems.  A foam inhibitor is included to minimize foaming tendencies during service.

Texcool P 150 coolant is recommended as a coolant in stationary engines in applications such as natural gas processing, irrigation, power generating systems, oil 'led operations, and portable air compressors.  Texcool P 150 should not be used in automobile or non-stationary heavy duty diesel applications!  Texcool P 150 coolant protects the cooling systems from freezing in winter, overheating in summer, and corrosion in all seasons.  Extensive simulated service and actual service tests have proven the effectiveness of Texcoot P 150 coolant in heat transfer applications over the use of brine or uninhibited glycol-water solutions.  The results were lower maintenance costs and improved heat transfer with Texcoot P 150.

Texcool P 150 coolant is recommended as a heat transfer fluid for line heaters.  A line heater circulates a heated fluid around a pipe to raise the temperature of the pipe contents in order to control reactions or ease pumping operations.

Texcool P 150 coolant is recommended as a heat transfer fluid for snow melting systems, loading ramps, walkways, highways, airfield runways, and as a coolant in ice skating rinks and air conditioning systems.

Note: These products are not to be used to protect the inside of potable water systems against freezing.

Product Description and Features

Texcool P 150 is a single phase, propylene glycol based product blended with a premium quality additive package.  It is a silicate free coolant designed for use in stationary engines.  This product provides anti-foarn properties, and rust and corrosion protection for brass, copper, solder, steel and cast iron.  It mixes readily with clean tap water and is compatible with cooling system filters and supplemental additives.

Texcool P 150 is free of nitrites and amines.

Benef its

In service, Texcool P 150 provides:

  • Silicate free
  • Excellent heat transfer properties
  • Superior anti-foam characteristics
  • Superior corrosion protection for brass, copper, solder, steel and cast iron
  • Borax-free for maximum aluminum protection
  • Nitrite-free, amine-free
  • Mixes readily with clean tap water
  • Compatible with cooling system filters
  • Compatible with heavy duty diesel supplemental coolant additives
  • 100% biodegradable in its pure and unused form

Texcool P 200 Series

Back to top

Code 7940 Texcool P 200

Texcool P 200 is a superior quality, single phase, propylene glycol (USP) based product.  It is a silicate free coolant designed and USDA authorized for use in the immersion or spray freezing equipment of packaged poultry or wrapped meat under the Federal Meat and Poultry Products Inspection Program.  Texcool P 200 must be used in a manner which prevents direct or indirect contamination of edible products in official establishments operating under the Federal Meat and Poultry Products Inspection Program.

Product Application

Texcool P 200 is an inhibited propylene glycol (USP) based product that is used as an industrial coolant and heat transfer agent.  In non-USDA applications, Texcool P 200 may be used in applications where incidental contact with food is possible.  This product is not intended for use as a food component or additive.  The inhibitor system is designed to protect brass, copper, solder, steel, cast iron, aluminum, and other metals commonly found in industrial cooling and heating systems.  A foam inhibitor is included to minimize foaming tendencies during service.

Extensive laboratory simulated service and actual service tests have proven the effectiveness of Texcool P 200 coolant in Preventing corrosion.  Use of Texcool P 200 coolant for heat transfer applications in place of brine solutions or uninhibited glycolwater solutions lowers maintenance costs and improves heat transfer.

Product Description and Features

Texcool P 200 is a single phase, propylene glycol (USP) based product blended with a premium quality additive package.  It is a silicate free coolant designed and approved for use in the immersion or spray freezing equipment of packaged poultry or wrapped meat under the Federal Meat and Poultry Products Inspection Program. Texcool P 200 should not be used in automobile or non-stationary heavy duty diesel applications! This product provides anti-foam properties, and rust and corrosion protection for brass, copper, solder, steel and cast iron.  It mixes readily with any clean tap water and is compatible with cooling system filters and supplemental additives.

Texcool P 200 is free of nitrites and amines.

Benefits

In service Texcool P 200 provides:

  • Silicate free
  • Excellent heat transfer properties
  • Superior corrosion protection for brass, copper, solder, steel and cast iron
  • Nitrite-free, amine-free
  • Mixes readily with clean tap water
  • 100% biodegradable in its pure unused form